BC Biomedical IPA-2000S Manual de usuario descargar pdf (Pagina 149)

6-11

STEP 6

NOTES:

CThe Ground Leakage and Chassis

Leakage Current Test will be run the

same as above, only the DUT will be

ON.

CThere may be instances when the

DUT power is on but the unit continues

to request it be turned on. Since there

is a certain amount of current running

through the DUT even when the power

is off, the unit determines whether the

unit is on by looking at the differential

between the on and off currents

(Current On must be greater than

125% of Current Off for automatic

sensing to work).

CIf the differential is not enough, the

user can tell unit the DUT is on by

pressing .

SAFETY ANALYZER AUTO

TURN TEST UNIT ON

Leakage Currents With DUT Power On

In this step, the Ground and Chassis Leakage Currents

are measured with the DUT turned ON. This step must

be initialized by the user to ensure that the DUT is turned

ON.

The system will sense that the power has been turned on

and continue the test, sequencing through the following

screens.

DUT

Power

SAFETY SAFETY

SAFETY

ANAN

ALAL

YZER--AYZER--A

YZER--A

UTUT

OMAOMA

OMA

TIC MODETIC MODE

TIC MODE

RUNNING AN AUTOMATIC TEST

1 2 ... 144 145 146 147 148 149 150 151 152 153 154 ... 161 162

Comentarios a estos manuales

Sin comentarios

BC Biomedical IPA-2000S Manual de usuario Pagina 149

Comentarios a estos manuales

Relacionado con productos y manuales para De medición, control y control BC Biomedical IPA-2000S