BC Biomedical IPA-2000S Manual de usuario descargar pdf (Pagina 13)

1-3

INFUSION PUMP ANALYZER OVERVIEW

INFUSION PUMP INFUSION PUMP

INFUSION PUMP

ANAN

ALAL

YZER OYZER O

YZER O

VERVER

VER

VIEWVIEW

VIEW

INFUSION PUMP ANALYZER OVERVIEW

The Infusion Pump Analyzer is used to monitor the flow and

pressure of the fluid moving through a pump. There are four

tests within the Infusion Pump Analyzer: Flow, Flow--PCA, Distal

Occlusion and Proximal Occlusion. Fully configured with two

interface modules, the system can run two independent

channels, with any combination of tests active.

The Flow test records elapsed time, average flow, instantaneous

flow, volume and pressure at data points and reports the average

flow, total volume, elapsed time and back pressure at the

conclusion of the test. The Flow--PCA test adds a connection

for the module to simulate patient request when there is no flow.

The Flow--PCA test records all the aforementioned information

as well as additional Bolus data and lockout times, average Bolus

flow, average Bolus volume, average lockout time and number

of deliveries.

The Distal Occlusion test records time and pressure and gives

the maximum pressure and its time. The Proximal Occlusion

test is a convenient timer to use when performing the Proximal

test manually on the DUT.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 161 162

Sin comentarios

BC Biomedical IPA-2000S Manual de usuario Pagina 13