BC Biomedical IPA-2000S Manual de usuario descargar pdf (Pagina 88)

3-4

GETTING READY FOR A TEST

INFUSION INFUSION

INFUSION

ANAN

ALAL

YZER--FLYZER--FL

YZER--FL

Choose Channel Screen

To run a test, toggle to the appropriate Channel screen

using .

STEP 2

CHANNEL 1 IDLE

PRIME WITH 50 mL

THEN PRESS START

Connect and Prime Device

Connect device under test (DUT) to the unit and prime the

channel. (See PRIMING for details.)

STEP 1

GETTING READY FOR A FLOW TEST

NOTES:

There can be up to two modules

connected to the analyzer.

The modules are interchangeable and

the unit will run with a single module

connected to either port.

The Channel 1 or 2 screens will only

be displayed when the modules are

connected to those ports.

These instructions will utilize Channel

1 for examples; Channel 2 functions

identically.

NOTES:

The NORMAL LED on the remote

module will blink at a rate of twice per

second, when a channel needs to be

primed.

As the channel becomes ready, the

NORMAL LED on the remote module

will blink at a rate of once per second.

The priming message will not display

if the DUT is already primed.

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 161 162

Sin comentarios

BC Biomedical IPA-2000S Manual de usuario Pagina 88